Gardyn 4.0, Step 5: Attach the LED Light Bars

Identify your light bars. The right light bar has the camera at the top, while the left light bar has the camera in the middle.

• Both cameras come covered in blue tape. For Kelby to see your Gardyn clearly and offer guidance, remove the tape. Your removal of the tape signifies your consent to the cameras' use. You can learn more about how the cameras work here.

Beginning with either bar, hold the light vertically to carefully yet firmly slide the bottom of the light onto the lower blades attached to the lid. To do so, rotate the light bar as needed to align the parts, press the pin, and slide it in.

Press until you see the grey post in the notch of the light bar.

If you need to unplug the LED light bars, make sure your device is powered off. Simply press the pin and gently slide the light vertically until it releases.