Gardyn 4.0, Step 6: Mount the Upper Blades

First, insert the metal rod on the back of the columns. Slide the metal plate into the center column, and insert 1 plug to hold it in place.

Connect the side columns to the rod.

Next, make sure the light protective caps are on the end of the upper blades without the hole.

Beginning with either blade, slide it into place by inserting the upper blade midway into the column, then into the light bar before pushing both ends fully into place, reaching the screw.

You may need to gently slide the protective cap down the blade until it reaches the light bar.

Insert the remaining 2 plugs into the back of the columns to secure.

Finally, attach your Gardyn to the wall using the 2 safety straps in the back. Screw directly into a wood stud when available. In the absence of a stud, use the appropriate anchor and screw for your wall type.