Gardyn Studio, Step 3: Assemble & Connect the Columns

Check to make sure the irrigation hoses inside the columns are straight by grabbing the end of each irrigation hose and pulling gently.

Align the arrows on the bottom of the column and twist until the vine design is aligned.

Beginning with either column, hold the column vertically and plug the hose connector all the way onto the tube inside the column’s base until flush with the bottom of the base.

Twist the column to secure, and repeat with the other column.

Note that when fully twisted, the black arrows will no longer be aligned.

Finally, ensure all modules are properly tightened so that all open slots face the front of the lid.

Questions? Email us at support@mygardyn.com